Epsilon Switch & Amplifier System

IRIG Distribution Amp

VersaTap 10 MHz to T1/E1 Converter

8140 Frequency Distribution System

8143 Signal Selector/Distribution Amplifier

8144 Clock Selector/Distribution Amplifier

900-series Modular Distribution System

8140 Frequency Distribution System
	Frequency Distribution Amplifier and Frequency Tap System Spectracom’s Frequency Distribution System comprises of the Model 8140 Distribution Amplifier and combinations of Model 8140T LineTaps, Model 8140MT MultiTaps, and Model 8140VT VersaTaps. The Model 8140 Distribution Amplifier sends accurate frequencies from a frequency reference or master clock to multiple locations over long distances. The amplifier derives 10 MHz from the input signal, and sends it on the trunk line coaxial cables to up to 25 remote stations.

Overview

Details

Documents

Send More Info

Eliminates Periodic Frequency Calibration of Test Equipment
For Calibration Lab or Production Test
10-MHz or Custom Outputs
Trunk-Line Frequency Distribution Lowers Wiring Costs
Unlimited System Size When Daisy Chaining
5-Year Warranty

Spectracom’s Frequency Distribution System comprises the Model 8140 Distribution Amplifier and combinations of Model 8140T LineTaps, Model 8140MT MultiTaps, and Model 8140VT VersaTaps.

The Model 8140 Distribution Amplifier sends accurate frequencies to multiple locations over long distances. The amplifier derives 10 MHz from the input signal, and sends it on the trunk line coaxial cables to up to 25 remote stations. Running a separate cable to each station is not necessary. Input and output signals are monitored. Faults light a visual indicator or activate an optional Audible Alarm. Unlimited numbers of remote stations may receive output from one frequency standard by adding distribution amplifiers.

Remote station LineTaps receive both 10 MHz and DC power from the trunk line cable. The signal is buffered, then converted to the frequency needed at that station. MultiTaps are configurable dividers with three square wave outputs. VersaTaps are single-frequency synthesizers that provide custom frequency outputs.

Technical Specifications

Frequency Output

Four connectors provide 10-MHz sine wave signals to terminated cable via separate buffer amplifiers. Level is 0.5 V rms, 50 ohms, superimposed on +12 VDC. One front panel TTL-compatible output is selectable between 0.1, 1, 5, and 10 MHz. Phase noise is typically less than -130 dB/Hz 1 kHz from the carrier when the distribution amplifer is fed with noise-free 10 MHz.

Number of Remote Stations

Each Distribution Amplifier will drive up to 25 standard Line Tap loads. If additional loads must be driven, another Model 8140 Distribution Amplifier may be "daisy-chained" onto the output of a Line Tap to drive 25 more loads.

TAP	STANDARD LINE TAP LOAD
8140T	1
8140MT	3
8140MT-40	1
8140VT-10-00	3
8140VT-10-00-40	1

Distance to Remote Stations

Up to 25 LineTaps on RG-58 50-ohm cable at a maximum distance of 1500 feet from base station. Model 8140TA Distribution Line Extender extends this distance to up to 3000 feet with fewer Line Taps allowed. Using low-loss cable such as RG-8 extends distance to 3000 feet for all 25 Line Taps.

Audible Alarm (Option 20)

Activated by input or output loss.

Frequency Input

10 MHz; Signal level 0.25 to 3.0 Vrms, 50-ohm impedance.
Input options: 5 or 1 MHz.

Power

115/230 VAC ±15%, 50/60 Hz; 40 W

Warranty

5-Year Warranty

Physical & Environmental Specfications

Size	8.5"W x 5.25"H x 13.5"D 216W x 133H x 343D mm
Weight	12 lbs
Connectors	Input/Output: BNC; 4 DC-isolated output terminators included AC power: 3-prong connector, 7' cord included
Controls	Power switch, frequency select
Indicators	Power, output fault
Temperature	0° to +50°C (32°F to 122°F) operating range -40°C to 85°C (-40°F to 185°F) storage range
Humidity	95% R.H.non-condensing

Ordering Information

1	Specify Spectracom Model 8140 plus Option 01 for 19" EIA rack mount Option 07 for 5-MHz input Option 08 for 1-MHz input Option 20 for audible alarm
2	Specify output taps: Model 8140Txx provides fixed sine wave outputs 8140T10 = 10 MHz 8140T5 = 5 MHz 8140T1 = 1 MHz 8140TR1 = 0.1 MHz Model 8140MT provides configurable TTL frequencies. Model 8140VT provides fixed custom frequencies.
3	Specify any required Line Extenders, 8140TA
4	When exceeding 25 standard Line Tap loads, (see table) order additional Model 8140 Amplifiers.